🎉 Up to 70% Off Selected ItemsShop Sale
Bosch Purion 400 display retrofit kit for Bosch smartsystem
HomeStore

Bosch Purion 400 display retrofit kit for Bosch smartsystem

Bosch Purion 400 display retrofit kit for Bosch smartsystem

Bosch Purion 400 display & retrofit kit

Compatible with all motors and batteries in the Bosch smart system.

Installation

Method 1

Bosch Purion 400 display with Bosch System Controller and the Bosch Mini Remote. Also required, Bosch Y display cable. The Y cable is connected to the motor, System Controller and Purion 400. The Mini Remote on the handlebar is connected to the system via Bluetooth.

Method 2

Bosch Purion 400 display with Bosch LED Remote. Also required Bosch display cable, which is available in various lengths. The display cable connects the motor to the Purion 400. 

Contents

  • 1x Purion 400 display
  • 1x Bracket 31.8mm or 35mm - select correct size for handle bar (check bike spec)
  • 1x Screw M4x10.5
  • 1x Operating and installation instructions

    When retrofitting the Purion 400 with Y cable assembly, please order the blanking plug  to close the unused display port on the Purion 400 separately.

Description

  • Transmissive 1.6-inch TFT display (320 x 160 pixels)
  • IP55 protected against water splash and dust
  • Positioned in the handlebar triangle to protect the display
  • Operation via the LED Remote or Mini Remote (in conjunction with the System Controller)
  • Audible signals for navigation and system cues

Connectivity

  • Recording activities via LED Remote, System Controller and eBike Flow app
  • Remaining range overview depending on the various riding modes
  • Warnings if state of charge of the phone drops below 30%
  • Customisation of the status bar (display of state of charge, time or speed)
  • Software updates via eBike Flow app
  • Additional features: Shift recommendation, display of riding and fitness data, display when walk assistance and light are activated
Select Handlebar size
From $51.61

Original: $147.46

-65%
Bosch Purion 400 display retrofit kit for Bosch smartsystem—

$147.46

$51.61

More Images

Bosch Purion 400 display retrofit kit for Bosch smartsystem - Image 2
Bosch Purion 400 display retrofit kit for Bosch smartsystem - Image 3
Bosch Purion 400 display retrofit kit for Bosch smartsystem - Image 4

Bosch Purion 400 display retrofit kit for Bosch smartsystem

Bosch Purion 400 display & retrofit kit

Compatible with all motors and batteries in the Bosch smart system.

Installation

Method 1

Bosch Purion 400 display with Bosch System Controller and the Bosch Mini Remote. Also required, Bosch Y display cable. The Y cable is connected to the motor, System Controller and Purion 400. The Mini Remote on the handlebar is connected to the system via Bluetooth.

Method 2

Bosch Purion 400 display with Bosch LED Remote. Also required Bosch display cable, which is available in various lengths. The display cable connects the motor to the Purion 400. 

Contents

  • 1x Purion 400 display
  • 1x Bracket 31.8mm or 35mm - select correct size for handle bar (check bike spec)
  • 1x Screw M4x10.5
  • 1x Operating and installation instructions

    When retrofitting the Purion 400 with Y cable assembly, please order the blanking plug  to close the unused display port on the Purion 400 separately.

Description

  • Transmissive 1.6-inch TFT display (320 x 160 pixels)
  • IP55 protected against water splash and dust
  • Positioned in the handlebar triangle to protect the display
  • Operation via the LED Remote or Mini Remote (in conjunction with the System Controller)
  • Audible signals for navigation and system cues

Connectivity

  • Recording activities via LED Remote, System Controller and eBike Flow app
  • Remaining range overview depending on the various riding modes
  • Warnings if state of charge of the phone drops below 30%
  • Customisation of the status bar (display of state of charge, time or speed)
  • Software updates via eBike Flow app
  • Additional features: Shift recommendation, display of riding and fitness data, display when walk assistance and light are activated

Product Information

Shipping & Returns

Description

Bosch Purion 400 display & retrofit kit

Compatible with all motors and batteries in the Bosch smart system.

Installation

Method 1

Bosch Purion 400 display with Bosch System Controller and the Bosch Mini Remote. Also required, Bosch Y display cable. The Y cable is connected to the motor, System Controller and Purion 400. The Mini Remote on the handlebar is connected to the system via Bluetooth.

Method 2

Bosch Purion 400 display with Bosch LED Remote. Also required Bosch display cable, which is available in various lengths. The display cable connects the motor to the Purion 400. 

Contents

  • 1x Purion 400 display
  • 1x Bracket 31.8mm or 35mm - select correct size for handle bar (check bike spec)
  • 1x Screw M4x10.5
  • 1x Operating and installation instructions

    When retrofitting the Purion 400 with Y cable assembly, please order the blanking plug  to close the unused display port on the Purion 400 separately.

Description

  • Transmissive 1.6-inch TFT display (320 x 160 pixels)
  • IP55 protected against water splash and dust
  • Positioned in the handlebar triangle to protect the display
  • Operation via the LED Remote or Mini Remote (in conjunction with the System Controller)
  • Audible signals for navigation and system cues

Connectivity

  • Recording activities via LED Remote, System Controller and eBike Flow app
  • Remaining range overview depending on the various riding modes
  • Warnings if state of charge of the phone drops below 30%
  • Customisation of the status bar (display of state of charge, time or speed)
  • Software updates via eBike Flow app
  • Additional features: Shift recommendation, display of riding and fitness data, display when walk assistance and light are activated
Bosch Purion 400 display retrofit kit for Bosch smartsystem | ADO electric bikes